­

New XUV560 Crossover Utility Vehicle

Mid-size Crossover Gator Utility Vehicles
XUV560 Crossover Utility Vehicle

 (3)

REQUEST A QUOTE
Key Features
  • Four-wheel independent suspension for excellent ride and handling
  • Ergonomic operator station with easy-to-use controls
  • Versatile customization

More Info

Features

Delivers quick acceleration and provides a top speed of 28 mph (45 km/h)
Powertrain 34.8 cu in. (570-cm<sup>3</sup>) gasoline engine Powertrain 34.8 cu in. (570-cm3) gasoline engine

The Gator™ XUV560 Crossover Series Utility Vehicles are powered by a 34.8 cu in. (570-cm3), V-twin gasoline engine. The carburetor is tuned for rapid throttle response, reliable cold-weather starting, smooth mid-range power delivery and quiet idling.

 

The engine offers the following performance and reliability features:

  • 16 hp* at 3600 rpm
  • Tuned to deliver 0- to 15 mph (0 to 24.1 km/h) acceleration in 3.5 seconds
  • 28 mph (45 km/h) top speed
  • Dynamically tuned carburetor for rapid throttle response upon demand while allowing the engine to burn clean under light loads.
  • V-twin, 90-degree overhead valve design maximizes power and torque and provides longer valve life
  • Designed for cold-weather starting (tested to -20°F [-28.9°C])
  • Full-pressure lubrication system
  • Spin-on oil filter with drain bracket and oil drain valve enable easy servicing
  • High air-flow air filter
  • Laminated and contoured engine blower housing cuts noise levels while reducing oil temperatures 25-30 degrees
  • T6 heat-treated aluminum alloy connecting rods and piston ring package
  • 200 -W(16 maximum amp) stator charging system for accessory capability
  • Dual-header pipe to muffler maximizes airflow and provides a unique V-twin sound
  • Spark-arresting muffler is USFS approved
  • Low fuel consumption and large 4.9-U.S. gal. (18.9-L) fuel tank
  • Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

 

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

Designed for all-day comfort with many vehicle conveniences
Instrument cluster, optional speedometer, and back-lit switches Instrument cluster, optional speedometer, and back-lit switches
Sealed under-hood storage Sealed under-hood storage
In-dash cup holders and sealed glove box In-dash cup holders and sealed glove box
S4 optional under-seat storage S4 optional under-seat storage
  • Operator-centric design provides class-leading ergonomics and comfortable seats
    • Easy entry/exit and pass through for operator and passenger
    • Optimal seating position provides more legroom
    • Automotive-like ergonomics
    • Excellent comfort while driving
  • Best-in-class sealed storage volume of 12.7 gal. (48 L) with a large in-dash glove box and under hood storage. An additional 9 gal. (34 L) of under-seat storage is available on the S4 models.
  • Hinged hood rotates open without tools for access to storage
  • Side-by-side seating provides ample room for one operator and one passenger
    • Seats tilt forward for ease of service and to keep dry during outdoor storage
  • Two cup holders are located within reach of the operator's station
  • Hour-meter comes standard to assist in maintaining regular service intervals
  • Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
  • Seven predrilled dash switch locations with snap out caps for various electrical accessories
  • Fuel gauge that can be viewed from the operator's seat
  • Occupant protective structure (OPS) with three-point seat belts and passenger side grab handles located on front post
  • Start in gear or neutral position for quick starting. The service brake must be engaged to start.
Large, extra-durable, one-piece cargo box ensures hard-driving performance and longevity
Cargo box Cargo box
Cargo box, tailgate down Cargo box, tailgate down

The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly styled exterior pieces are made of TPO for extra durability.

Cargo box tailgate
Tailgate handle Tailgate handle
Tailgate pivot and removal feature Tailgate pivot and removal feature
Removable lanyards Removable lanyards

The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

 

The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

Cargo-box tilt and removal
Integrated handle for manual cargo box tilt (both sides) Integrated handle for manual cargo box tilt (both sides)
Tilted cargo box Tilted cargo box

The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release functions as the lift lever as well, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy to use attributes makes this cargo box best-in-class.

 

For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

Integrated tie-down points
Integrated tie-down point in cargo-box bed Integrated tie-down point in cargo-box bed
Additional tie-down points Additional tie-down points

The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Flip-up D-shaped rings in all four corners inside the cargo-box bed
  • Multiple points along the edge of the cargo-box side walls
  • Tie-down bars on either side of the cargo box with optional cargo-box rail kit. This kit also provides a mounting system using accessories that possess the 1-in. (25.4-mm) quick clamp.
Optional accessories
Cargo box rail system Cargo box rail system
Bed mat Bed mat
Cargo box power lift Cargo box power lift
Cargo box wall extensions (shown on RSX) Cargo box wall extensions (shown on RSX)

Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

  • Cargo box rail system
  • Cargo box bed mat
  • Cargo box power lift
  • Cargo box wall extensions
  • Spare tire rack
  • Bucket holder
Specifications

 

Length  32.3 in. (82 cm)
Width 47.6 in. (120.9 cm)
Depth 11.7 in. (29.7 cm)
Volume 8.9 cu ft (0.25 m³)
Weight capacity 400 lb (181.4 kg)
Dump angle
Bed height (from ground)
 
45 degrees
30 in (76.3 cm)

 

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Four-wheel independent suspension provides unparalleled ride over challenging terrain and excellent handling through corners
XUV front suspension detail XUV front suspension detail

To complement the comfortable operation station, the XUV560 and XUV590i is equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

 

The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

Dual A-arm front suspension features include:
  • Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
  • 8 in. (203 mm) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Adjustable coil over shocks absorb the most demanding terrain
  • Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
  • Automotive-style fully boxed and welded high strength steel lower A-arms to minimize unsprung mass and maximize strength
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
  • Anti-dive front suspension geometry provides a solid platform for confident braking
  • Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback
XUV rear suspension detail XUV rear suspension detail
Independent rear suspension features include:
  • 8 in. (203 mm) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
  • Adjustable coil over shocks absorb the most demanding terrain
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation

NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.

Sleek styling exemplifies capable off-road, yet hard-working performance
XUV shown in green/yellow XUV shown in green/yellow

A modern front fascia, wide front bumper, sweeping hood lines, and high fender lines complete the styling package:

  • Sleek styling exemplifies a capable off-road, yet hard-working vehicle. The Gator™ XUV Series suits the emotional appeal of a customer purchasing a vehicle that is fun and functional.
    • Hard-edged lines
    • Hood bulge
    • Sweeping headlights with mounting locations for a turn signal light kit
    • High front and rear fenders states long wheel travel
    • Well-matched cargo box with truck-style tailgate
  • Steel front bumper support the styled front composite parts, while the heavy steel skid plate provides protection from rocks and stumps
  • Styled parts are injection-molded TPO, a durable, engineered plastic designed to sustain impacts; the plastic is paintable
  • Accepts the highly integrated optional 2-in. (50.8-mm) front receiver hitch with recovery loops and Warn™ 3500-lb (1587.6-kg) winch
  • 75-plus attachments such as roofs, windshields, lights, protection components, and poly cab highly complement the overall look of a capable crossover vehicle.

 

Warn is a trademark of Warn Industries Inc.